Cambridge Custom Transfers
6.gif (106 bytes) spacfiller.gif (165 bytes)

Home
spacer.gif (72 bytes)
About Us
spacer.gif (72 bytes)
Latest Releases
spacer.gif (72 bytes)
Products
spacer.gif (72 bytes)
Custom Service
spacer.gif (72 bytes)
Work in Progress
spacer.gif (72 bytes)
Contact Us

6.gif (106 bytes)

7.gif (106 bytes)

435x10whit.gif (104 bytes)

MY VERY LATEST PRODUCTS!


QUALITY JAPANESE MOTORS AT A RIDICULOUS PRICE!

 

These motors have been extremely well received, and are used by some of the most respected names in the loco-building community. Hundreds have already been supplied; get them while you can!

ONLY 7.50 PER MOTOR !!!

This offer price is less than half that of the most popular Japanese motors used by modellers in 4mm. scale, and includes UK P&P.

During a current modelling project, I have come across a source of these motors;

http://www.mitsumi.co.jp/latest/Catalog ... ies_e.html .

They are midway between the 1220 and 1620 flat can motor, with a double-ended 1.5mm. dia. shaft which projects approximately 12mm. at either end.

Study the .pdf spec. sheet and the dimensions drop-down - these quality Japanese motors are ideally suited to model railway use.

I purchased ten for my own use, and am pleased to report that, having fitted a Mitsumi motor to a High Level 60:1 Loadhauler gearbox, and mounted this combination in the frames of a Midland 3F, I have what I believe to be the sweetest-running chassis that I have ever built. (.... and that's quite a few)!

You can see the motor fitted in the chassis at http://www.rmweb.co.uk/community/index.php?/topic/94701-new-products-from-cambridge-custom-transfers/page-2#entry1884439 .

I get the impression that these Mitsumi motors are lower-revving than Mashima motors, but they have plenty of torque and are beautifully smooth-running and quiet.

Using one of my trusty H&M Walkabout controllers, the top speed of this 0-6-0 slogger is as close to that of the prototype as I could wish - ie. a sprightly but not unseemly canter!!

This is ideal - I have the full range of the controller slider to drive the loco from a barely perceptible crawl to a realistic top speed.

The fly-wheel that I fitted gives a satisfying impression of momentum, even with a lightweight bare chassis.

So, I can with confidence recommend these Mitsumi motors.

I normally confine my activities strictly to transfers, but these motors are just too good to let pass.

If you want one or more of these motors, (I include two M2 fixing screws with each motor), e-mail me at cctrans@hotmail.com to place your order.

See below for payment options.

Regards,

John Isherwood.

 


SIMPLER PAYMENT METHODS !!!

You can now order as follows :-

By post - written order with delivery address, contact phone number, and cheque, payable to C. J. Isherwood, sent to CCT, 6 Roseland Gardens, Bodmin, PL31 2EY. Cheques made payable to Cambridge Custom Transfers or CCT cannot be accepted, and your order will be cancelled.

By e-mail & Paypal - send your order, INCLUDING YOUR POSTAL ADDRESS, by e-mail to cctrans@hotmail.com, plus payment via PAYPAL using the PAY FOR GOODS OR SERVICES option. Payments sent in this way incur a fee payable by me, so please add 6.5% to your payment to cover this. Payments that do not include the additional 6.5% will be refunded, and the order cancelled.

By e-mail & BACS (bank transfer) - send your order, INCLUDING YOUR POSTAL ADDRESS, by e-mail to cctrans@hotmail.com, plus payment via BACS to :-

Account name : C J ISHERWOOD

Account number : 50028665

Sort code : 40-16-59

Payment reference : YOUR INITIAL & SURNAME.

Orders which include motors and transfers will be despatched under separate cover.

IF IN DOUBT ABOUT THE TOTAL PRICE FOR YOUR ORDER, OR ARE UNSURE ABOUT ANY ASPECT OF YOUR ORDER, PLEASE ENQUIRE FIRST, (ENCLOSING AN SAE OR PHONE NUMBER IF CONTACTING BY POST).

Note : all prices include UK postage and packing;

(overseas customers add 10%, MINIMUM 3.50 - sorry, blame Royal Mail).

I SUPPLY TRANSFERS FOR MANY SCALES - PLEASE REMEMBER TO QUOTE THE SCALE REQUIRED WHEN ORDERING. I TRY TO PROCESS ORDERS ON THE DAY THAT THEY ARE RECEIVED.

ALL OF MY TRANSFER SHEETS ARE PRINTED TO ORDER - NO STOCK IS HELD. FOR THIS REASON I CANNOT ACCEPT RETURNS.

E-mail address :  cctrans@hotmail.com

Postal address :

CAMBRIDGE CUSTOM TRANSFERS,

6 ROSELAND GARDENS,

BODMIN

 PL31 2EY.


COMPLETELY NEW !!

(Note that all BR wagon transfers are for the first 'unboxed' style of lettering unless otherwise stated).


Sheet BL171 BR numbering for ex-GWR coaches; (designed specifically to suit 4mm. scale RTR models).

2mm., 3mm., 3.5mm. &  4mm. scale price is 7.50

S scale price is 15.00

7mm. scale price is 22.50

Gauge 1 price is 30.00 


8.gif (106 bytes) 6.gif (106 bytes)
bottom.gif (214 bytes)